Goods Lift Birmingham

Goods Lift Birmingham

2 stop single mast pit installed (by others) Goods Lift 500kg installation Birmingham with a clear platform size 1500mm x 1200mm, FFL3500mm. Platform fitted with 3 x 1100mm high infilled panels on the non-loading sides and single infilled opening interlocked gate on loading sides Red RAL 3020. Goods lift supplied with “Press to Go” one touch controls with emergency stop at both levels.

The self-supporting lift structure is manufactured from 100mm box section steel with mesh infilled panels RAL 7024. Goods lift manufactured with 2000mm high single loading cladded door with viewing panel at each level and these are fitted with magnetic interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level guarding is 2200mm.

General Specification

  • Emergency lowering system when power is cut off
  • Pre wired control box included magnetic starter and overload fuse
  • Upper level travel limit switch and overload relief valve
  • Hydraulic cylinders feature emergency velocity fuse if line breaks
  • Control points are fitted to both ground and upper floor levels
  • The hydraulic power pack and electrical system housed separately at ground level
  • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor
  • Lifting speed 0.14 m/s
Mezzanine Floor Goods Lifts Birmingham Mezzanine Goods Lift Birmingham Goods Lifts Birmingham Goods Lifts West Midlands lightbox MACby v6.1

Manual Handling Solutions Goods Lift range offers a complete solution for efficient and safe travel of product between mezzanine floors. Each lift is designed to suit the application taking into consideration lift height, platform size, weight capacity, same side or opposing transfer and the product to be handled.

A freestanding structural design eliminates the requirement for civil works and low level ramp access means no unwanted floor pits, furthermore safety shoot bolts, “Press to Go” operator controls and multi-floor stops can be incorporated into the design.

We have a wealth of experience in the design, manufacturing process and installing cost effective goods lifts in commercial, residential and industrial buildings properties throughout the West Midlands and the UK. We can design, manufacture and install a bespoke goods lift that accommodates almost any space and specifications. Our goods lifts range of hydraulic goods lifts are ideal for warehouse, factories, supermarkets, retail stores and more.

Contact us on Tel 01553 811977 or email us at

Visit our main website