Mezzanine Floor Lift Scissor Table style Goods Lift

Mezzanine Floor Lift Scissor Table style Goods Lift Installed at Sapa Components (Pressweld) Ltd

 

Both gates will be fitted with Electrical & Mechanical interlocks to prevent the platform moving if the gate is not shut and prevent the gate from opening unless the platform is parked.

Mezzanine Floor Lifter - Sapa Components Goods Lift Mezzanine Floor Lifter dsc00653Mezzanine Floor Lifter - Sapa Components Goods Lift Sapa Components Goods Lift Mezzanine Floor Lifter -  Goods Lift Mezzanine Floor Lifter - Sapa Components Goods Lift Mezzanine Floor Lift Scissor Table style Goods Lift, Installed at Sapa Components (Pressweld) Ltd lightbox MACby VisualLightBox.com v6.1

Sapa Components (Pressweld) Ltd
APPLICATION Lifting goods
PIT INSTALLATION YES
QUANTITY 1 OFF
CONSTRUCTION Single Scissor Table
MODEL / TYPE TLXY3-15/460-2C
CAPACITY 1500KG – evenly distributed load
TRAVEL / STROKE 4600mm
CLOSED HEIGHT 750mm
TOTAL RAISED HEIGHT 5350mm
PLATFORM SIZE 2500mm long & 1520mm wide, with smooth top plate
OPERATION 2.3 kW compact electro-motor with hydraulic pump unit and adequately sized oil tank wired to IP55 Standard Power unit is located outside the lift
POWER SUPPLY 400 Volts, 3 phase, 50 Hz
CONTROL VOLTAGE 24 Volts with IP55 insulated electrics
TRAVEL SPEED Approximately 75 seconds to maximum height
CYLINDERS Normally single acting precision made units complete with pipe break valve to prevent a rapid lowering speed in the unlikely event of a hydraulic hose failure
WEIGHT Approximately 1750KG’s
STANDARD FINISH Blue (RAL 5017) & Black (RAL 9005) – spray painted
Specific colour available at extra cost
CONTROLS 2 x controls (located at ground and 1st floor levels) UP & DOWN latching hand control units with EMERGENCY STOP button and 4 meter long cable
HANDRAILS & GATES 1100mm high handrails to both long sides and 1 short side Single outward opening gate on other short side, electrically interlocked type 1
SAFETY TRIP BAR Aluminium safety frame with built in safety function. If the safety frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again.
MAINTENANCE Standard safety legs are provided to support the scissor lift mechanism in the raised position and must be deployed for all servicing and maintenance work
ENCLOSURE At ground and 1st floor levels, the table will be guarded to 1 long side by a partition wall. We will supply and fit guarding to the remaining 3 sides:

Ground level: 3 sided steel mesh enclosure measuring 2.9m x 1.9m x 3.9m (L x W x H)

1st floor level: 3 sided steel mesh enclosure measuring 2.9m x 1.9m x 1.1m (L x W x H)

Both levels there will be a single outwards opening gate to allow access.

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk