Vertical Platform Lift Bolton Manchester

 Vertical Platform Lift Bolton Manchester

Passenger / DDA MHS5000 Vertical Platform Lift – Bolton – Manchester

To supply, deliver, offload and install on a site properly prepared by others:

MHS5000 Vertical Platform Lift in accordance with the specification

AirVault DDA Platform Lift Manchester DDA Vertical Platform Lift Bolton MHS5000 Platform Lift Bolton MHS5000 Vertical Platform Lift Bolton Vertical Platform Lift Manchester lightbox MACby VisualLightBox.com v6.1
  • 12 months warranty including 1 service visit in 1st year
  • Shaft roof with automatic lighting
  • Platform sizes 1100 mm wide x 1500 mm long
  • Steel fully glazed landing standard white RAL 9016 finish doors
  • Landing doors with integrated self-closers
  • Voice Announcement
  • One touch landing call buttons
  • 415v 3 Phase electrics with direct start
  • Telephone on carriage connected by others

SUMMARY SPECIFICATION

  1. GENERAL DATA
  • Model MHS5000 Vertical Platform Lift
  • Rated Load 400 kg (500 kg uprated capacity available at additional cost)
  • Rated Speed 0.15 m/s with direct start
  • Drive System Screw and rotating nut driven by 2.2 kW AC motor.
  • Floors served 2
  • Travel 3 metres
  • Configuration Single Entry
  • Environment Internal
  1. SPACE REQUIREMENTS
  • Floor Area 1550 x 1650 (width x depth) mm Pit Depth 50 mm
  • Headroom 2300 mm minimum above top floor served
  1. PLATFORM
  • Platform Size1100 x 1500 mm (wide x long).
  • Carriage1100mm high vertical facia with control panel to one long side.
  • Finish The platform carriage is powder coat finished in metallic silver RAL 9006.
  • Handrail Smooth moulded anodised aluminium handrail fitted to console.
  • Control panel Floor, alarm and emergency stop buttons.
  • Operation Constant pressure control from carriage.
  • Push buttons large easy to use tactile push buttons with LED illumination.
  • Communication Telephone on carriage connected by others.
  • Alarm Button on control panel for battery supported alarm at lower floor.
  • Overload – Overload protection with visual and audible indication.
  • Lighting Push buttons on the control panel are illuminated with battery backup.
  • Flooring Vinyl non-slip flooring – Nearly Black.
  • Safety Edge Fitted around sides of platform and above the carriage
  1. SHAFT ENCLOSURE
  • Construction Insulated steel faced modules assembled on site to give a totally flush and smooth surface to both sides. A complete readymade steel shaft finished in white colour RAL 9016 (inside/outside). Solid and smooth finish shield wall provided. Shaft panels not provided to machine side
  • Lighting Shaft ceiling with automatic light.
  1. LANDING ENTRANCES
  • Landing Doors Type A20 – Steel fully glazed landing doors
  • Full height landing doors provided at all levels.
  • Manual opening single swing doors with integrated self-closers.
  • Finishes Door and frame – standard white RAL 9016 finish
  • Fire Rating None
  • Opening Size 900 mm wide x 2000 mm high
  • Operation One touch control from landings
  • Push buttons large easy to use tactile push buttons with red/green halo illumination.
  • Audible indication Voice announcer to inform of lift arrival
  1. ELECTRICAL DETAILS AND POWER REQUIREMENTS
  • Power Supply 415 V, 3 Phase, 50Hz, 20A lockable isolator with direct start
  • Location Permanent 20A rotary lockable isolator externally positioned min. 2100mm high within 500mm of electrical cabinet – integral with door frame at bottom floor
  • Motor 2.2kw
  • Emergency lowering Manual hand-winding device

Installed, AirVault Trampoline Park, Unit A 1002, Westhoughton Industrial Estate, Bolton, Greater Manchester, BL5 3XU

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk