Mezzanine Goods Lift, Goods Lifts, Manual Handling Solutions

Mezzanine Goods Lifts Manual Handling Solutions,  Mezzanine Goods Lifts shown in the gallery below are bespoke custom designed and built to suit individual customer requirements.

For a quotation please contact Manual Handling Solutions on Tel 01553 811977, or contact us

1 – Mezzanine Floor Lift, Goods Lift, Ref Spalding

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift in Spalding

Typical overview of the Mezzanine floor lift: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1250mm deep and will close down over the legs.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

2 – Mezzanine Floor Lift, Goods Lift, Installed at Coventry City Council

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift, Installed at Coventry City Council

Typical overview of the Mezzanine floor lift: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1250mm deep and will close down over the legs.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

3 – Mezzanine Floor Lift, Goods Lift, installed at Johnson Shoes

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift, installed at Johnson Shoes

The lift will be constructed using a single mast which must be bolted to the Mezzanine floor RSJ through the floor. The lift platform will measure approximately 1400mm wide by 1200mm deep and will close down over the legs. The clear working platform area will be 1340mm x 1140mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

4 – Goods Lift Scissor Table style, Ref Manchester Pit Installed Scissor Table

Mezzanine Goods Floor Lifter

Goods Lift Scissor Table style, Ref Manchester Pit Installed Scissor Table

CONTROLS – A control panel will be fitted on both the lower and upper floor.

SAFETY EDGE – There is a built in safety function in the safety frame. If the Safety Frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

 

5 – Mezzanine Floor Lift, Goods Lift, Installed at Aston Martin Gaydon Headquarters in Warwickshire

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift, Installed at Aston Martin Gaydon Headquarters in Warwickshire

Typical overview of the Mezzanine floor lifter: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 2140mm wide by 1540mm deep and will close down over the legs. The platform will feature 1100mm high rails on all sides and a double outwards opening gate. The gates will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

 

6 – Mezzanine Floor Lift, Goods Lift, Installed at Masteroast Peterborough

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift, Installed at Masteroast Peterborough

Typical overview of the Mezzanine Goods lifter: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1500mm deep and will close down over the legs. The platform will feature 1100mm high rails on all sides and a single outwards opening gate on the right-hand side of the mast. The gate will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

7 – Mezzanine Floor Lift, Goods Lift, Installed at ITAB UK Hemel Hempstead

Mezzanine Goods Lift

Mezzanine Floor Lift, Goods Lift, Installed at ITAB UK Hemel Hempstead

The Manual Handling Solutions Mezz Lift is a robust and versatile platform lift for handling all sorts of loads up to approx 750kg safely and efficiently between floors such as ground floor and mezzanine level. It offers users a cost effective solution to comply with Manual Handling Regulations and reduce the risk of injury to employees.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

8 – Mezzanine Floor Lift, Goods Lift, Installed at Anglia, Sandall Road, Wisbech

Mezz Lift

Mezzanine Floor Lift, Goods Lift, Installed at Anglia, Sandall Road, Wisbech

The Mezz Lift is a robust and versatile platform lift for handling loads up to 300kg safely and efficiently. It offers users a cost effective way to comply with manual handling regulations and reduce the risk of injury to employees. The entire handling process can be undertaken by a single person without any manual lifting to promote safety and productivity. A unique hold-to-run system promotes safety by stopping the lift whenever the control lever is released.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

9 – Mezzanine Floor Lift, Goods Lift, Installed at ECO Plastics Hemswell, Lincolnshire

Mezzanine Floor Lift

Mezzanine Floor Lift, Goods Lift, Installed at ECO Plastics Hemswell, Lincolnshire

Control points will be mounted at both the ground and mezzanine levels attached to the guarding. Both control points will feature latching control buttons; Raise, Lower & E-stop SAFETY TRIP BAR Aluminium safety frame with built in safety function.

If the safety frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again. MAINTENANCE Standard safety legs are provided to support the scissor lift mechanism in the raised position and must be deployed for all servicing and maintenance work.

 

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

10 – Mezzanine Floor Lift, Goods Lift, Installed at Johnnie Longden Ltd, Poole Dorset

Mezzanine Goods Floor Lifter

Mezzanine Floor Lift, Goods Lift, Installed at Johnnie Longden Ltd, Poole Dorset

The lift platform will measure approximately 1350mm wide by 1250mm deep and will close down over the legs of the masts. The clear working platform area will be 1290mm x 1130mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

11 – Mezzanine Floor Lift Scissor Table style, Goods Lift, Installed at Sapa Components (Pressweld) Ltd

Mezzanine Floor Lift Scissor Table style, Goods Lift, Installed at Sapa Components (Pressweld) Ltd

Mezzanine Floor Lift Scissor Table style, Goods Lift, Installed at Sapa Components (Pressweld) Ltd

2 x controls (located at ground and 1st floor levels) UP & DOWN latching hand control units with EMERGENCY STOP button and 4 meter long cable. 1100mm high handrails to both long sides and 1 short side Single outward opening gate on other short side, electrically interlocked type 1.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

12 – Goods Lift, Installed at One Stop Shop 26-28 Town Green, Wymondham, Norfolk

Goods Lift, Installed at One Stop Shop 26-28 Town Green, Wymondham, Norfolk

Goods Lift, Installed at One Stop Shop 26-28 Town Green, Wymondham, Norfolk

We offer scissor lift which has a 1300mm x 800mm lift platform size, which will have a 1200mm x 720mm usable area, narrowing to approx. 650mm width through the drop down barrier.1000Kgs capacity as standard, but would be de-rated to 500Kgs when handling goods.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

13 – Mezzanine Archive Floor Lift installed at Exxon Mobil, Fawley, Hampshire

Mezzanine Archive Floor Lift installed at Exxon Mobil, Fawley, Hampshire

Mezzanine Archive Floor Lift installed at Exxon Mobil, Fawley, Hampshire

The lift is to be positioned on the end of the racking so will be no wider than 800mm. The platform size will be 450mm x 850mm (loading onto the 450mm side) and will dock at around 900mm from the floor at both levels.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

14 – Mezzanine Floor Lift, Goods Lift, installed at Fisher BioServices UK, Bishops Stortford, Herts

Mezzanine Floor Lift, Goods Lift, installed at Fisher BioServices UK, Bishops Stortford, Herts

Mezzanine Floor Lift, Goods Lift, installed at Fisher BioServices UK, Bishops Stortford, Herts

The lift will be supplied with a full height enclosure on all sides, measuring approximately 1830mm deep, 1910mm wide and 6900mm high overall. The enclosure will feature single gates on side B at both levels; 2200mm high on the ground floor and 1100mm high on the first floor.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

15 – Mezzanine Floor Lift, Goods Lift, installed at Magna Specialist Confectioners Ltd, Telford

Mezzanine Floor Lift, Goods Lift, installed at Magna Specialist Confectioners Ltd, Telford

Mezzanine Floor Lift, Goods Lift, installed at Magna Specialist Confectioners Ltd, Telford

Table will be supplied with a remote power pack for ease of change over, should a fault occur. A spare power pack will also be provided.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

16 – Mezz Lift, Goods Lift, installed at Boots Warehouse, Thurrock

Mezz Lift, Goods Lift, installed at Boots Warehouse, Thurrock

Mezz Lift, Goods Lift, installed at Boots Warehouse, Thurrock

Goods Lift, with maximum working load 500kg, fully enclosed in a self supporting mesh shaft. The platform will be increased to 1350mm x 1600mm to accommodate clients request for loading a pallet or 4 trolleys.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

17 – MezzLift Floor Lift, Three Stop Goods Lift (250kg) installed at Bryant Broadcast, Croydon

MezzLift Floor Lift, Three Stop Goods Lift (250kg) installed at Bryant Broadcast, Croydon

MezzLift Floor Lift, Three Stop Goods Lift (250kg) installed at Bryant Broadcast, Croydon

Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The lift will have three stops; ground, first tier mezzanine and second tier mezzanine. At each level the entrance to the lift will be via 2000mm clear high gates fitted with electrical interlocks which will prevent the gates from being opened unless the platform is docked at the appropriate level

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

18 – Goods Lift installed at One Stop Store Stanley Road Oldbury West Midlands

Goods Lift installed at One Stop Store Stanley Road Oldbury West Midlands

Goods Lift installed at One Stop Store Stanley Road Oldbury West Midlands

1100mm high mild steel handrails complete with mid rail and 150mm high kick plates suitable for mounting along both long sides of the scissor lift platform by the contracted installer. One short end to be fitted with a simple drop down barrier with micro stop/go switch.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

19 – Mezz Lift, 250kg Mezzanine Goods Floor Lift installed at Charles Tyrwhitt, Newport Pagnell, Milton Keynes

Mezz Lift, 250kg Mezzanine Goods Floor Lift installed at Charles Tyrwhitt, Newport Pagnell, Milton Keynes

Mezz Lift, 250kg Mezzanine Goods Floor Lift installed at Charles Tyrwhitt, Newport Pagnell, Milton Keynes

Mezz Lift Goods Lift , with maximum working load 250kg which is to be fixed back to the existing side wall, guarded two sides at the lower level and three sides at the upper level. The platform size will be 800mm x 1000mm, guarded three sides to suit loading on and off the same side.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

20 – Goods Lift Scissor Table style installed at Prada Bicester Village

Goods Lift Scissor Table style installed at Prada Bicester Village

Goods Lift Scissor Table style installed at Prada Bicester Village

Scissor Table style Goods Lift designed and installed at Bicester Village for Prada. Manual Handling Solutions were approached by Gregori Chiarotti Architects in offering a solution for the delivery of Goods to the Prada store at Bicester Village.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

21 – 250kg Mezz Lift for Eat Natural, Halstead, Essex

250kg Mezz Lift for Eat Natural, Halstead, Essex

250kg Mezz Lift for Eat Natural, Halstead, Essex

Mezz Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The platform will be 1650mm x 850mm to allow two trolleys to be transported at the same time.

Additional feature – The Mezz Lift will be fitted with a fall arrest block on to the platform, independent of the existing chains which would hold the platform in place in the event of a catastrophic failure.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

22 – 200kg Mezz Lift, to service three levels, for Wiggle Ltd

200kg Mezz Lift, to service three levels, for Wiggle Ltd

200kg Mezz Lift, to service three levels, for Wiggle Ltd

The platform will be 1200mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction. At the entrance to the lift at each level there will be 2300mm clear height gates which will be fitted with electrical interlocks to prevent the gates from being opened unless the platform is docked at the appropriate level.

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

23 – Waist Height Mezz Lift – Deben UK Ltd

Waist Height Mezz Lift - Deben UK Ltd

Waist Height Mezz Lift – Deben UK Ltd

Platform size 1000mm x 800mm, the platform will finish 800mm higher than finished floor level at both landings to assist loading and unloading by hand. At the lower level there will be a 2000mm high slam shut twin gates, while at the upper level there will be a fixed panel up to 800mm high with slam shut twin gates above.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

24 – 200kg Mezz Lift for Central Presentations, Kenilworth

200kg Mezz Lift for Central Presentations, Kenilworth

200kg Mezz Lift for Central Presentations, Kenilworth

200kg Goods Lift, with a lift height of 2740mm maximum working load 200kg. the lift is fully enclosed in a self supported mesh shaft. The platform size will be 850mm x 1750mm to suit all trolley sizes, but to accommodate this platform size the capacity will have to be limited to 200kg.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

25 – Goods Lift installed at Ultra Electronics (Weymouth)

Goods Lift installed at Ultra Electronics (Weymouth) by Manual Handling Solutions.

The Goods Lift will be constructed using a single mast which will be self supporting bolted to the floor. Lift Height 4110mm, lift platform will measure approximately 1210mm wide by 1620mm deep and will close down over the legs flush with the floor.

The clear working platform area will be 1420mm x 1210mm. A fully supporting lift structure, manufactured from box section steel with double side-hinged loading gates at each level.

The gates are fitted with a heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed.

Low voltage ‘dead man’ push buttons fitted with key lock and emergency stop at each level. Electrics 3 phase, 415v, 50Hz, 3.0Kw.

Maximum lift capacity will be 1000Kg.

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

26 – 50kg Goods Lift installed at RAF Menwith Hill, Harrogate, North Yorkshire

50kg Goods Lift installed at RAF Menwith Hill, Harrogate, North Yorkshire 50kg Goods Lift installed at RAF Menwith Hill, Harrogate, North Yorkshire.

Mast type Mezzanine Goods Lift to be installed alongside a mezzanine floor from Manual Handling Solutions.

The Mezzanine Goods Lift will be constructed using a single mast which will be supported by the mezzanine floor structure and a steel framework bolted to the floor. The lift platform will measure approximately 1450mm wide by 1200mm deep and will close down over the legs. The clear working platform area will be 1390mm x 1140mm. The overall plan size of the lift will be approx 1450mm wide x 1450mm deep.

The platform will feature 1100mm high rails on all sides and a single outwards opening gate on side A. The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. The platform will close to the floor with a 60mm lowered height and have a total raised height of 2565mm. At the top level, the lift height will be governed by a limit switch system to ensure that the platform parks with the floor. The platform will be supplied with a loading ramp, 1450mm wide by 600mm long. The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate wall mounted box at ground level. Control points will be positioned at both levels. All points will feature latching call buttons and emergency stop controls. Power requirement for the lift: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir. Maximum lift capacity will be 50Kg.

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

27 – Comma Oil Single Pallet Goods Lift 500 kg Capacity

Comma Oil Single Pallet Goods Lift 500 kg Capacity

Comma Oil Single Pallet Goods Lift 500 kg Capacity

This Goods lift will be constructed using a single mast which will be supported by the mezzanine floor structure as well as a framework mounted at ground level. The lift platform will measure approximately 1500mm wide by 1500mm deep and will close down over the legs.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

28 – Comma Oil Double Pallet Goods Lift 500 kg Capacity

Comma Oil Double Pallet Goods Lift 500 kg Capacity

Comma Oil Double Pallet Goods Lift 500 kg Capacity

Mezz Lift – Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. Lift height floor to floor 3240mm. The platform would be 1000mm x 1000mm to suit the trolleys to be loaded and would be guarded 900mm high to suit the loading direction.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

29 – DRS 250kg Mezz Lift

DRS 250kg Mezz Lift

DRS 250kg Mezz Lift

This Goods lift will be constructed using a single mast which will be supported by the mezzanine floor structure as well as a framework mounted at ground level. The lift platform will measure approximately 2700mm wide by 1500mm deep and will close down over the legs.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

30 – MezzLift Specification for GCI SmartBunker 500kg

MezzLift Specification for GCI SmartBunker 500kg

MezzLift Specification for GCI SmartBunker 500kg

MezzLift, with maximum working load 500kg, fully enclosed in a self supporting mesh shaft. Lift Height Floor to Floor 3100mm, the platform will be 1000mm by 1350mm to suit the size of Server Racks being transported and will be guarded three sides to suit the loading direction. At the entrance to the Mezz Lift at both levels there will be 2500mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

31 – Bespoke Goods Lift for D S Smith Packaging

Bespoke Goods Lift for DS Smith (3)

Bespoke Goods Lift for D S Smith Packaging

Bespoke 500kg Mast Design Goods Lift with a raised height 3100mm (2 stops) Platform size 2900mm x 1000mm (800mm usable) to accommodate large profile cutting dies. Platform Material Anti skid checker plate to include mesh frame down both sides of the platform. The lift will be surface mounted fitted with drop down ramps (Bridging Plate) at each end. Operation is Electro-hydraulic with Electrics 3 phase, 415v, 50Hz, 3.0Kw.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

32 – Stage Electrics Bespoke 1500kg Goods Lift Installation

Stage Electrics Bespoke 1500kg Goods Lift Installation

Stage Electrics Bespoke 1500kg Goods Lift Installation

3 Stop Bespoke Goods Lift with a total raised height of 3240mm and a lift capacity of 1500kg. Platform is Anti Skid checker plate with a platform size 2500mm x 2000mm. Operation is by Electro-hydraulic, Electrics 3 phase, 415v, 50Hz, 3.0Kw, Controls Low Voltage automatic pulse press to go’ push buttons fitted with key lock and emergency stop at each level Total weight; 1,500 kgs approx.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

33 – Goods Lift for R.I.M Plastics Technology Ltd

Goods Lift for R.I.M Plastics Technology Ltd

Goods Lift for R.I.M Plastics Technology Ltd

Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The platform size will be 1300mm x 1100mm a standard pallet or other items and will be guarded 900m high to two sides to suit the load direction. At the entrance to the lift at both levels there will be 2000mm high gates which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level. A small fixed ramp will be provided at the lower level to assist loading on to the 50mm deep platform.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

34 – Bespoke Goods Lift for Mitras Automotive

Bespoke Goods Lift for Mitras Automotive

Bespoke Goods Lift for Mitras Automotive

2 Stop Bespoke Goods Lift with a total raised height of 4525mm and a lift capacity of 500kg. Platform is fitted with Anti-Skid checker plate with a platform size 4000mm x 2000mm. At ground level the lift is fitted with 2200mm High Saloon Style Gates. The upper level is fitted with 1100mm High Saloon Style Gates The gates are fitted with Light Duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

35 – Hospital Bed Lifts, The Tunbridge Wells Hospital at Pembury

Hospital Bed Lifts, The Tunbridge Wells Hospital at Pembury.

Hospital Bed Lifts, The Tunbridge Wells Hospital at Pembury

Bed Lift with a SWL of 250kg designed to allow engineers to carry out maintenance work safely on various types of hospital beds

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

36 – Bay-Lift installed for Lamb Weston Meijer (UK) Ltd

Bay-Lift installed for Lamb Weston Meijer (UK) Ltd

Bay-Lift installed for Lamb Weston Meijer (UK) Ltd

Bay Lift, with maximum working load 1000kg, mounted to the existing loading dock. The maximum platform width is 2450mm, due to the length of planks, and there will be a depth of 1370mm. There will be a folding toe on to the short side to assist loading on to the 45mm deep platform

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

37 – Goods Lift 1000kg for the Wellcome Trust

Goods Lift 1000kg for the Wellcome Trust

Goods Lift 1000kg for the Wellcome Trust

Goods Lift with a total raised height of 3585mm and a lift capacity of 1000kg. Platform is Anti Skid checker plate with a platform size 3000mm x 1400mm
At ground level the self-supporting structure is fitted with 2200mm High Saloon Style Gates.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

38 – Goods Lift One Stop Shop in Wakefield

Goods Lift One Stop Shop in Wakefield

Goods Lift One Stop Shop in Wakefield

Bespoke Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft with a Lift Height 2595mm.

The platform will be a maximum size of 1400mm x 840mm and guarded 900mm high on 3 sides infield to suit the loading entry and exit on the same side. Platform will also have a drop down barrier to restrict trolleys from rolling forward. A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level.

Control is via a hold to run control station adjacent to the gates at both levels. Included is a 12 months Statutory Inspection and maintenance this ensures continued safe and reliable use of the equipment and full compliance with current legislation.  In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges.

Goods Lift is enclosed in a fireproof enclosure at lower level only (Supplied by others)

Delivery and installation

One Stop Shop
47 – 51 Bradford Road
St John`s
Wakefield
WF1 2AA

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

Goods Lift for One Stop Shop, Wakefield Bespoke Goods Lift One Stop Shop, Wakefield Bespoke Goods Lift installed in Wakefield lightbox MACby VisualLightBox.com v6.1

39 – Goods Lift High Rise 1000kg capacity

Goods Lift High Rise 1000kg capacity

Goods Lift High Rise 1000kg capacity

Goods Lift with a total raised height of 11,543mm and a lift capacity of 1000kg. Lift is recessed in a 110mm pit constructed by the client. Platform surface has Anti-Skid checker plate with a platform size 2720mm x 1720mm (Usable 1,515mm). At both levels the self-supporting structure is fitted with 2 x 2200mm Saloon Opening Gates. Each gate is fitted with Heavy Duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

40 – Galvanised Goods Lift installed and commission 2000kg for a frozen food company in Norfolk

Galvanised Goods Lift installed and commission 2000kg for a frozen food company in Norfolk

Galvanised Goods Lift installed and commission 2000kg for a frozen food company in Norfolk

Goods Lift Hot Galvanised with a total raised height of 6550mm and a lift capacity of 2000kg. Platform is Anti-Skid Galvanised checker plate with a usable platform size 1550mm x 1530mm. Platform fitted with Shot Bolts as standard engaging at upper level when the lift parks. Additional protection/load positioning. At ground level the self-supporting structure is fitted with 2200mm High Saloon Style Gates. The upper level is integrated with the roller shutter loading doors and traffic light system. The roller shutter door with not open until the lift platform is docked

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

41 – Goods Lift – Waist Height – Hand Loaded, with a lift Capacity 250kg SWL

Goods Lift - Waist Height – Hand Loaded, with a lift Capacity 250kg SWL

Goods Lift – Waist Height – Hand Loaded, with a lift Capacity 250kg SWL

Goods Lift, with maximum working load 250kg, fully enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded two sides to suit the loading direction, the platform will back 800mm high from floor height at both levels to assist loading by hand. At the entrance to the lift at the lower level there will be a 2000mm clear height gates while at the upper level there will be an 800mm high fixed frame with a slam shut gate above this. The gates will be interlocked with a monitored electric strike to prevent the gates from being opened unless the platform is docked at the appropriate level.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

42 – Goods Lift with 300kg SWL Capacity

Goods Lift with 300kg SWL Capacity

Goods Lift with 300kg SWL Capacity

Self supporting structure requiring only floor fixing for the mast and enclosure, The hydraulic power pack and electrical system mounted to the mast. Control points are positioned on the rear of the mast at the lower level and on the enclosure side at the upper level (Additional control points are available as an option).

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

43 – Goods Lift with 300kg SWL Capacity Basingstoke

Goods Lift with 300kg SWL Capacity Basingstoke

Goods Lift with 300kg SWL Capacity Basingstoke

Self supporting structure requiring only floor fixing for the mast and enclosure. The hydraulic power pack and electrical system mounted to the mast. Control points are positioned on the rear of the mast at the lower level and on the enclosure side at the upper level (Additional control points are available as an option)

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

44 – Cellar Lift 275kg Vertical Chain Drive

Cellar Lift 275kg Vertical Chain Drive

Cellar Lift 275kg Vertical Chain Drive

Cellar Lift with a raised height 3050mm, A fixed 3mm platform plate will be supplied, the size to be 830mm x 765mm. The fixing support plate will allow for adjustment of 37mm up or down to allow for a fluctuation in the finished floor height. Platform to be fitted with Roller Conveyor supplied and fitted by client height being 85mm.Roller conveyor to extend 20mm above the mast to allow for products to pass over the mast onto an adjoining conveyor.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

45 – Goods Lift installed in Suffolk

Goods Lift installed in Suffolk

Goods Lift installed in Suffolk

At the entrance to the lift at both levels there will be 2250mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. A 2.2kw, 415 volt, three-phase and neutral supply is required terminated in an isolator at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

46 – MezzLift installed in Thame Oxfordshire

MezzLift installed in Thame Oxfordshire

MezzLift installed in Thame Oxfordshire

MezzLift, Goods Lift with Twin Mast, with maximum working load 300kg – Lift Height 5430mm enclosed in a self-supporting mesh shaft. The platform will be 1800mm x 1800mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2500mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

47 – Split Level Goods Lift installed in London

Split Level Goods Lift installed in London

Split Level Goods Lift installed in London

1100mm high mild steel handrails complete with mid rail and 150mm high kick plates suitable for mounting along one long side and one short end of the scissor lift platform. The remaining short end will be fitted with a single outward opening hinged gate complete with electrical switch. The platform will be fitted with a tread plate finish for improved grip in wet/dusty conditions. Installation will include securing down of lift, fitting of ancillary items, connection of mains power and all electrical systems, testing and commissioning of overall installation. Please see below for exclusions.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

48 – Goods Lift installed in Hampshire

Goods Lift installed in Hampshire

Goods Lift installed in Hampshire

Goods Lift, with maximum working load 200kg, fully enclosed in a self- supporting mesh shaft. The platform will be 900mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction. At the entrance to the lift at each level there will be 2300mm clear height gates which will be fitted with electrical interlocks to prevent the gates from being opened unless the platform is docked at the appropriate level. At the lower level there will be a small fixed ramp to assist loading on to the 50mm deep platform.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

49 – Goods Lift installed in Essex

Goods Lift installed in Essex

Goods Lift installed in Essex

Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. The platform will be 1480mm x 1680mm and guarded 900mm high on the non-loading edges. Lift height 3460mm. At the entrance to the lift at both levels there will be 2200mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

50 – Goods Lift installed in Hackney London

Goods Lift installed in Hackney London

Goods Lift installed in Hackney London

Goods Lift, with maximum working load 250kg, 3850mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

51 – Bespoke Goods Lift installed in Devon

Bespoke Goods Lift installed in Devon

Bespoke Goods Lift installed in Devon

Bespoke Goods Lift, with maximum working load 250kg, 3150mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

52 – Goods Lifts installed in Lancashire

Goods Lifts installed in Lancashire

Goods Lifts installed in Lancashire

Goods Lift, with maximum working load 250kg Double Mast, 3040mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 2650mm x 1400mm bespoke for Sofa trolley size and guarded 900mm high on the non-loading edges. Loading and unloading On/Off same side.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

53 – Goods Lift, Mezz Lift, Passenger Lifts, Platform Lifts, East Anglia, Norfolk

Goods Lift, Mezz Lift, Passenger Lifts, Platform Lifts, East Anglia, Norfolk

Goods Lift, Mezz Lift, Passenger Lifts, Platform Lifts, East Anglia, Norfolk

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Floor to Floor Height 3200mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

54 – Goods lift installed in Oxfordshire

Goods lift installed in Oxfordshire

Goods lift installed in Oxfordshire

Goods Lift, through floor with maximum working load 450kg, enclosed in a self-supporting mesh shaft.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

55 – Goods lift installed in Shropshire

Goods lift installed in Shropshire

Goods lift installed in Shropshire

The platform will be 1900mm x 1100mm and guarded 900mm high on the non-loading edges. Goods Lift, with maximum working load 500, 3400mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1900mm x 1100mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

56 – Goods Lift, Platform Lifts, Attended Goods Lifts, Lifting Platforms, London

Goods Lift, Platform Lifts, Attended Goods Lifts, Lifting Platforms, London

Goods Lift, Platform Lifts, Attended Goods Lifts, Lifting Platforms, London

Goods Lift, carriage of goods and trained operator rated at 1000kg SWL capacity with a travel height 3950mm 2 stops. Cabin size 2200mm width x 2800mm in depth with a clear head height 2400mm. Goods Lift installed into a 110mm pit.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

57 – Goods – Passenger Vertical Platform Lift St Ives Cambridgeshire

Goods – Passenger Vertical Platform Lift St Ives Cambridgeshire

Goods – Passenger Vertical Platform Lift St Ives Cambridgeshire

To supply, deliver, offload and install on a site properly prepared by others, 1 Off – MHS5000 Vertical Platform Lift

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

58 – Mezzanine Goods Lift Fareham Hampshire

Goods Lift - Mezzanine Goods Lift - Goods Lifts

Mezzanine Goods Lift Fareham Hampshire

Goods Lift for Linet UK, based at new location in Fareham Hampshire. Goods Lift with maximum working load 350kg, Lift Height 2940mm enclosed in a self-supporting 1” x 1” mesh shaft. The platform will be 2300mm x 1300mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

59 – Goods Lift – Loading Dock Lift Halstead Essex

Goods Lift – Loading Dock Lift Halstead Essex

Goods Lift – Loading Dock Lift Halstead Essex

Goods Lift – Loading Dock Lift (Single Scissor Mechanism) with 1500kg EDL, Goods plus Attendant. Platform size 3000mm x 1900mm closed height 300mm and a raised height 2000mm lift stroke 1700mm available limited to 1650mm stroke using an adjustable upper limit switch.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

60 – Goods lift installed in Salford Manchester

Goods lift installed in Manchester

Goods lift installed in Salford Manchester

Goods Lift, with maximum safe working load 500kg, Lift Height 4240mm and lift is enclosed in a self-supporting mesh shaft. The platform will be 1250mm x 1350mm and guarded 900mm high on the two non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

61 – 500kg Mezz Goods Lift for Greater Manchester

500kg Mezz Goods Lift for Greater Manchester

500kg Mezz Goods Lift for Greater Manchester

Mezz Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. Platform will be 1500mm x 1400mm and guarded 900mm high on the non-loading edges. The platform side guarding is fitted with two loop chains to support roll cages in transit.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

62 – 1000kg SWL Goods Lift installed in Birmingham

1000kg SWL Goods Lift installed in Birmingham

1000kg SWL Goods Lift installed in Birmingham

Goods Lift 3 stop with 1000kg SWL Capacity with a working platform size 2500mm x 1600mm, platform not recessed in a pit but will stand 300mm above floor level. Finished floor heights 3825mm first floor second floor 7650mm platform anti-skid checker plate.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

63 – Goods Lift installed in Exeter Devon

Goods Lift installed in Exeter Devon

Goods Lift installed in Exeter Devon

Goods Lift with 1000kg SWL Capacity with a working platform size 3800mm x 1755mm, platform recessed in a 200mm pit (by others). Finished floor height 4280mm and platform anti-skid checker plate. Goods are loaded on one short side at lower level and exit at opposite short side at upper level (through car lift).

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

64 – Good Lift installed in Leicester

Good Lift installed in Leicester

Good Lift installed in Leicester

Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. The platform will be 1300mm x 1300mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

65 – Goods Lift installed in Guildford

Goods Lift installed in Guildford

Goods Lift installed in Guildford

Goods Lift installed in Ash Vale Guildford Surrey with maximum working load 500kg, lift height 3035mm enclosed in a self-supporting mesh shaft. The platform will be 2100mm x 1000mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

66 – 500kg Bay-Lift for London Stansted Airport

500kg Bay-Lift for London Stanstead Airport

500kg Bay-Lift for London Stansted Airport

GBay-Lift, with maximum working load 500kg, Floor to Floor 1520mm, enclosed in a self-supporting mesh shaft. The platform will be 1700mm x 900mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

67 – Goods Lift 1000kg capacity installed in Pembrokeshire

Goods Lift 1000kg capacity with a lift height 3680mm. Platform size 2380mm width x 1860mm depth being anti-skid checker plate. Platform is fitted with Shot Bolt system that locks the platform when the lift docks at the upper level. Operation is Electro-hydraulic, Electrics 3 phase, 415v, 50Hz, 3Kw and operating controls are Low voltage ‘Press to Go’ push buttons fitted with key lock and emergency stop at each level. Finish Light Grey (RAL 9006) Dark Grey (RAL 7016) A fully supporting lift structure, manufactured from box section steel with 25mm² galvanised mesh infill sides and a double side-hinged loading gates at first floor level and an manual operated roller shutter door on ground floor level .

The gate and roller shutter door are fitted with a light duty interfaced lock system to ensure that either can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. At the bottom level a reinforced ramp is supplied to accommodate powered pallet trucks.

Lift is supplied in compliance with E.C rules, (Machinery Directive 2006/42/EC). EC Certificate of Conformity (According to Appendix 11 of the EC directive 98/37/EECO) is supplied confirming the equipment offered conforms to the essential requirements indicated by:

  • The Machine Directive 98/37/CE
  • The Low-Tension Directive 73/23/EEC and its subsequent amendments 93/68
  • The following rules are also taken into consideration: UNI EN 1493 (as much as can be applied)-EN 292/1/2-EN294-EN349-EN418-EN982-EN 593-EN 594-1-EN 1037-EN 1088-EN 60204-1

Electrical. The customer is responsible for providing a mains electrical supply to the equipment site, also the provision of an isolator and all necessary wiring. An electrician should be available to assist our engineer during the latter stages of installation to enable final testing to be carried out. The electrician should be conversant with motor switch gear. The electrician will be responsible for final electrical connection from the mains isolator supply to the lift control box. For 3 phase equipment, a 415volt, 3 phase supply with earth and neutral is also necessary.

Trunking. An amount of exposed electrical cable is used within the scope of the equipment and the lift call controls. This cabling is attached to the frame work of the lift using industrial standard cable ties. If the customer requires the cabling to be supplied in trunking, a separate quotation for this additional work will be supplied on request. Please note that any electrical cabling that connects together control boxes, switches, control gear etc. is not supplied in any form of trunking. Our engineers will leave any exposed cabling in a neat and tidy manner, should trunking be required this would be subject to an additional quotation based on particular site conditions.

Commissioning is included in the quoted price, providing it can be carried out at the time of installation. A separate charge may be made if commissioning is required at some other date.

Load testing is included in the offer price providing that the customer supplies a certified load on the day of installation/commissioning.

Puffin Produce, Haverfordwest Aerodrome, Withybush Road, Haverfordwest Pembrokeshire SA62 4BS

68 – Goods Lift installed in Edinburgh

Goods Lift installed in Edinburgh

Goods Lift installed in Edinburgh

Goods Lift installed in Edinburgh with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1350mm x 1250mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

69 – Goods Lift with 2000kg SWL capacity installed in London

Goods Lift with 2000kg SWL capacity installed in London

Goods Lift with 2000kg SWL capacity installed in London

Goods Lift with 2000kg SWL capacity, usable platform size 3000mm x 2500mm with a floor to floor height 3400mm. Twin mast Goods Lift is installed in a 250mm pit (by others) allowing flush entry. Platform fitted with anti-skid checker plate and the platform enclosure fitted 3 sides with 1100mm high mesh infill panels.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

70 – Goods Lifts installed in the Isle of Man

Goods Lift supplied, delivered and installed on the Isle of Man. Mezzanine floor goods only lift with operator access for loading and unloading, located indoors in an area with no public access and to be used by trained operators. Useable platform area 1500mm x 1400mm with travel 2.760m floor to floor, platform having single electrically interlocked 1100mm high gate, and twin electrically interlocked gates 1100mm high to the opposite side of the platform, along with 1100mm high handrails to remaining 2 sides that c/w knee rails and toe plates, through floor lift with mast supported by building structure.

Customer to provide 1870mm x 1775mm aperture in floor for lift to pass through with wall adjacent to mast side of lift capable of supporting 6 off RAWLBOLT type fasteners with pull out loads of 8kN per bolt. Customer to provide double doors at the lower level as per customers drawing, engineers will then fit interlocks whilst installing the lift.

Please note that it is required that the double doors supplied by the client are installed the same day as the lift, and they will need to be installed after the lift has been positioned, engineers will then build the upper enclosure whilst the double doors are being fitted by the client, engineers will then interlock the double doors immediately and commission the lift. Customer to provide 200mm deep pit at lower level with the pit edges in line with the aperture above.

Power pack mounted on top of the enclosure to keep it within the enclosure footprint as per the request of the client. Three sided wire mesh enclosure at upper level extending 1600mm above floor level with twin electrically mechanically interlocked gates on one side.

Enclosure to be floor mounted around aperture. 100mm/s lift speed, duty cycle: intermittent operation, latching push button controls for call, send and E/Stop at both levels, anti-slip platform surface, overload sensor, manual emergency lowering, maintenance stops, hose failure protection. 3 phase neutral and earth supply with isolator adjacent to lift.

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

71 – Goods Lift, with maximum working load 250kg

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels it will be the responsibility of the main contractor to install fire doors as required, with a vision panel.

We will then fit these doors with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level the existing floor should be cut out, down to the concrete to allow us a solid fixing, the platform will then dock flush with the floor level. A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level.

Control is via a hold to run, push button control station adjacent to the gates at both levels. Goods Lift supplied CE Marked with Declaration of Conformity. Operation and Maintenance Manual issue on completion. LOLER Report of Thorough Examination and Test issued on commission.

Operator training carried out on completion. Service Contract 12 months Statutory Inspections and maintenance ensures continued safe and reliable use of the equipment and full compliance with current legislation.  In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges

Installed, The Dockyard, B3/4, Left Bank, Irwell Square, Spinningfields, Manchester, M3 3AN

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

72 – Goods Lift 250kg Paisley, Glasgow

Goods Lift 250kg Paisley, Glasgow

Goods Lift 250kg Paisley, Glasgow

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Lift height 3590mm, platform size 1300mm x 1100mm and guarded 900mm high on the non-loading edges, these guards with be clad with ABS plastic sheeting.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

73 – Goods Lift Greenford London with maximum working load 500kg

 Goods Lift Greenford London with maximum working load 500kg

Goods Lift Greenford London with maximum working load 500kg

Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. Platform size 1300mm x 1300mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

74 – Bay Lift Beckenham Kent with maximum working load 500kg

 Bay Lift Beckenham Kent with maximum working load 500kg

Bay Lift Beckenham Kent with maximum working load 500kg

Bay Lift, with maximum working load 500kg, enclosed in a mesh shaft. BayLift platform will be 1500mm x 1200mm (to be confirmed once the floor to floor height is confirmed) and guarded with rails on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

75 – Galvanised Goods Lift Bracknell Berkshire

 Galvanised Goods Lift Bracknell Berkshire

Galvanised Goods Lift Bracknell Berkshire

Galvanised Goods Lift 500 kg capacity recessed into floor (pit by others). Platform size Overall Width 2000mm Depth 1800mm (useable depth 1600mm) Rise 4570mm 2 stops. Controls Low voltage ‘Press to go’ push buttons fitted with key lock and emergency stop at each level.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

76 – Goods Lift Southam, Warwickshire with maximum working load 250kg

 Goods Lift Southam, Warwickshire with maximum working load 250kg

Goods Lift Southam, Warwickshire with maximum working load 250kg

Goods Lift Southam, Warwickshire with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1100mm x 1300mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

77 – Goods Lift for Barony Universal Products plc

 Goods Lift installed Auchinleck

Goods Lift for Barony Universal Products plc

3 Stop Goods Lift with a total raised height of 4170mm and a lift capacity of 1500kg, Platform is Anti Skid checker plate with a platform size 1650mm x 1350mm however the addition of the platform mounted guard rail will reduce the useable platform size by approximately 25 mm on each side. This will result in a useable platform size of 1600 mm wide x 1300 mm depth.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

78 – Goods Lift Plymouth Cornwall

 Goods Lift Plymouth Cornwall

Goods Lift Plymouth Cornwall

Goods Lift with Capacity 3000Kg EDL Goods Only; Lift Stroke 3200mm available limited to the required height of approx. 2500mm using an adjustable upper limit switch. Raised height 3900mm when floor standing, closed height 700mm – 705mm pit depth required.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

79 – Goods Lift Dorchester Dorset

Goods Lift Dorchester Dorset

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 800mm and guarded 900mm high on the non-loading edges.

At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform. Power Supply 20 amp, 240 volt, single-phase terminated in a double pole switch at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels.

Goods Lift supplied CE Marked with Declaration of Conformity. Operation and Maintenance Manual issued on completion. LOLER Report of Thorough Examination and Test issued on commission. Operator training carried out on completion.

  Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

80 – Vertical Platform Lift Bolton Manchester

 Vertical Platform Lift Bolton Manchester

Vertical Platform Lift Bolton Manchester

Passenger / DDA MHS5000 Vertical Platform Lift – Bolton – Manchester

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

81 – Goods Lift Penryn Campus Cornwall

 Goods Lift Penryn Campus Cornwall

Goods Lift Penryn Campus Cornwall

Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. Lift height 3005mm with a platform size 1300mm x 1300mm guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

82 – Goods Lift Basildon Essex

 Goods Lift Basildon Essex

Goods Lift Basildon Essex

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 1000mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

83 – Goods Lift Heavy Duty Harlow Essex

 Goods Lift Heavy Duty Harlow Essex

Goods Lift Heavy Duty Harlow Essex

Heavy Duty Goods Lift 1000kg capacity recessed in a 150mm pit, lift height 4000mm. Platform size Width 1,250mm Depth 2,800mm (useable depth 2,500mm) Platform Material Anti-skid checker plate.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

84 – Goods Lift Gateshead Tyne and Wear

Goods Lift Gateshead Tyne and Wear

Goods Lift – Mezzanine Lift, with maximum working load 1000kg, enclosed in a self-supporting mesh shaft. The platform will be 1500mm x 1500mm and guarded 900mm high on the non-loading edges, fitted with a platform levelling system to lock the platform in place when it docks at the upper landing. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 1000mm long fixed ramp can be provided to assist loading on to the 75mm deep platform, or you may wish to consider preparing a 75mm deep sump for the lift to sit in, which would allow flush access on to the platform.

A 2.2kw, 415 volt, three-phase and neutral supply is required terminated in an isolator at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels.

Installed – Team Valley Retail Park, Team Valley Trading Estate, Gateshead, Tyne and Wear NE11 0BD

 

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

85 – Loading Bay Goods Lift Somerset

 Loading Bay Goods Lift Somerset

Loading Bay Goods Lift Somerset

Loading Bay Lift TYPE TR-BD-40058 / TLX-50/160-4C with a SWL 3000kg, platform size 2850mm long x 1600mm wide, with smooth top plate. Lift stroke 1600mm with a closed height 400mm scissor lift is pit installed. OPERATION 3.5 kW compact electro-motor with hydraulic pump unit and adequately sized oil tank wired to IP55 Standard Power unit located inside the lift.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

86 – Goods Lift Evesham Worcestershire 1500kg

 Goods Lift Worcestershire

Goods Lift Evesham Worcestershire 1500kg

Goods Only Lift Evesham Worcestershire; Heavy duty goods lift recessed in a 150mm pit (by others) with 1500kg SWL capacity, platform anti-skid checker plate with a clear working platform size 1500mm x 1500mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

87 – Goods Lift Wimborne Dorset

 Goods Lift Wimborne Dorset

Goods Lift Wimborne Dorset

Heavy Duty Goods Lift 1000kg installed Caterpillar Marine Power UK Ltd Dorset. Goods Lift with a clear working platform size1500mm x 1500mm having a travel of 4420mm. Lift is surface mount and supplied with a run on checker plated ramp.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

88 – Goods Lifts Cladded Aldermaston Hampshire

 Goods Lifts Cladded Aldermaston Hampshire

Goods Lifts Cladded Aldermaston Hampshire

Goods Only Lift Fully Cladded 1000kg in a self-supporting cladding structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024 fitted flush into a 70mm pit (by others) with a platform size 1350mm x 1200mm in Traffic Red RAL 3020. Upper level exit is 90° from the lift entrance at lower level and finished floor height being 3500mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

89 – Galvanised Goods Lift Birkenshaw Bradford West Yorkshire

 Galvanised Goods Lift Birkenshaw Bradford West Yorkshire

Galvanised Goods Lift Birkenshaw Bradford West Yorkshire

External Hot Dipped Galvanised Goods Lift with Man on Board controls for 1 trained operator and goods only. 1000kg Goods lift with a clear working platform size 1500mm x 2500mm. Goods Lift is situated in a 150mm pit (by other) with a travel height 8500mm over 4 stops.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

90 – Vehicle and Motorcycle Lifts

 Vehicle and Motorcycle Lifts

Vehicle and Motorcycle Lifts

Motorcycle Lift / Motorcycle Goods Lift Plymouth Devon with maximum working load 400kg, enclosed in a self-supporting mesh shaft. The platform will be 1300mm x 2400mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

91 – Bin Lift Platform – Bay Lift 500kg SWL

 Bin Lift Platform - Bay Lift 500kg SWL

Bin Lift Platform – Bay Lift 500kg SWL

Bin Lift Platform – Bay Lift, with maximum working load 500kg, Travel Height 1745mm, fully enclosed in a self-supporting mesh shaft. The platform will be 1900mm x 1220mm and guarded by a fixed hand rail to the two non-loading sides.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

92 – Loading Bay Scissor Lift Table

 Loading Bay Scissor Lift Table

Loading Bay Scissor Lift Table

The Loading Bay Lift Table is intended to handle trolleys, wheelie bins and general goods. Only authorised and trained persons associated with the load are permitted to ride on the lift platform. The Loading Bay Lift Table is installed outdoors on an existing concrete slab, to descend 300mm higher than the lower (yard) floor level.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

93 – Co-Op Store Split Level Goods Lift

 Co-Op Store Split Level Goods Lift

Co-Op Store Split Level Goods Lift

1100mm high mild steel handrail complete with mid rail and 150mm high kick plates mounted along both long sides of the lift platform. These will come complete with sheeted infills.One short end to be fitted with an 1100mm high mild steel single outward opening hinged gate with electrical switch. This will also be in filled.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

94 – Loading Bay Lift Platform

 Loading Bay Lift Platform

Loading Bay Lift Platform

Bay Lift, with maximum working load 500kg. The platform will be 1400mm x 1200mm and guarded with auto-erect rails on the non-loading edges. The lift will be supported by a steel framework, bolted into the floor at ground (lower) level and when not in use the lift will fold up at the upper level but the mounting frame will protrude 600mm from the back wall. When the door frame is made good it’s vital to make sure that the wall is flush, by making up or removing the trunking along the floor.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

95 – Goods Lift Ashford Middlesex

 Goods Lift Ashford Middlesex

Goods Lift Ashford Middlesex

Goods Lift with maximum working load 500kg, enclosed in a self-supporting mesh shaft. The platform will be 1300mm x 1300mm and guarded 900mm high on the non-loading edges lift height 3600mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

96 – Goods Lift Doncaster Yorkshire

 Goods Lift Doncaster Yorkshire

Goods Lift Doncaster Yorkshire

Mezzanine Goods Lift, with maximum working load 350kg, enclosed in a self-supporting mesh shaft. Platform size 2300mm x 1300mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

97 – Goods Lift Wiltshire

 Goods Lift Wiltshire

Goods Lift Wiltshire

Goods Lift installed Malmesbury, Wiltshire, with maximum working load 500kg, enclosed in a self-supporting mesh shaft lift height 3294mm. Platform size 2500mm x 1500mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

98 – Goods Lift Dunstable Bedfordshire

 Goods Lift Dunstable Bedfordshire

Goods Lift Dunstable Bedfordshire

Goods Lift 1000kg with an internal platform size 2000mm width x 1100mm depth x 2000mm high. Floor to floor travel being 3150mm recessed within a 100mm pit by others, lift speed 0,15 m/s.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

99 – Bakery Trolley Goods Lift London

Bakery Trolley Goods Lift London

Bakery Trolley Goods Lift London

Bakery Trolley Lift / Goods Lift installed London lift rated at 100kg with a platform size 840mm x 700mm (door opening 700mm) the bakery trolley lift is located in the basement of the bakery and extends through the first floor aperture into the main shop.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

100 – Goods Lift, Coventry, Warwickshire

Goods Lift, Coventry, Warwickshire

Goods Lift, Coventry, Warwickshire

Goods Lift installed Cyan Park Coventry Warwickshire, Mezz Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft steel frame, 1” x 1” mesh filled lift height being 4530mm. The platform will be 1300mm x 1300mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

101 – Goods Lift Leicester

Goods Lift Leicester

Goods Lift Leicester

Mezzanine Goods Lift 500kg installed Leicester in a self-supporting cladding structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. With a platform size 1500mm x 1500mm and 1350mm door openings at both levels finished in Traffic Red RAL 3020. Lift height 2970mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

102 – Goods Lift London Park Royal

Goods Lift London Park Royal

Goods Lift London Park Royal

1500kg Twin Mast 3 Stop Goods Lift installed Park Royal London. Platform size 3000mm x 3000mm finished anti-skid checker plate, finished floor levels 3500mm to 7000mm. Goods Lift is installed in a 250mm pit (by others) and has a travel speed 10cm per sec. Goods Lift fitted with load indication – slow down switch for soft landing.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

103 – Goods Lift Park Royal London

Goods Lift London

Goods Lift Park Royal London

1500kg Twin Mast 2 Stop Goods Lift installed Park Royal London. Platform size 2750mm x 3000mm finished anti-skid checker plate, finished floor level 7000mm. Goods Lift is installed in a 250mm pit (by others) and has a travel speed 10cm per sec.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

104 – Goods Lift Slough Berkshire

 Goods Lift Slough Berkshire

Goods Lift Slough Berkshire

Goods Lift Slough Berkshire, with maximum working load 200kg, fully enclosed in a self- supporting mesh shaft. The platform will be 900mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

105 – Goods Lift Ulverston Cumbria

 Goods Lift Ulverston Cumbria

Goods Lift Ulverston Cumbria

Goods Lift Cladded with a 500kg capacity installed Ulverston Cumbria with a travel height 3200mm. Goods lift extends through a formed aperture (by others) with self-supporting cladded structure comprised of infilled sheet steel clad panels Dark Grey RAL 7024 with a platform size 1500mm x 1500mm in Cav Red RAL 3011.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

106 – Goods Lift Wymondham Norfolk East Anglia

 Goods Lift Wymondham Norfolk East Anglia

Goods Lift Wymondham Norfolk East Anglia

Goods Lift 500kg with Man on Board controls (Trained Attendant) and installed in a 100mm pit (by others) installed Wymondham Norfolk East Anglia.With a travel height 3050mm the self-supporting cladded structure passes through the mezzanine aperture to allow for same side loading and unloading.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

107 – Goods Lift Appleby in Westmorland Cumbria

 Goods Lift Appleby in Westmorland Cumbria

Goods Lift Appleby in Westmorland Cumbria

Goods Lift with a 500kg capacity installed Appleby-in-Westmorland Cumbria with a travel height 3107mm. Goods lift passes through a formed aperture (by others) with self-supporting cladded structure comprised of infilled sheet steel clad panels Dark Grey RAL 7024 with a platform size 1500mm x 1500mm in Cav Red RAL 3011.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

108 – Goods Lift Poole Dorset

 Goods Lift Poole Dorset

Goods Lift Poole Dorset

Goods Lift 500kg installed Poole Dorset in a self-supporting cladded panel structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. With a platform size 1500mm x 1500mm and 1350mm door openings at both levels finished in Traffic Red RAL 3020.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

109 – Double Scissor Goods Lift

 Double Scissor Goods Lift

Double Scissor Goods Lift

Double Scissor Goods Lift Hot Dipped Galvanised with 500kg capacity installed Camberwell London. Pit installed (pit by others) with a platform size 1850mm length x 1350mm wide closed height 400mm and total raised height 2400mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

110 – Goods Lift Basement

 Goods Lift Basement

Goods Lift Basement

Basement Goods Lift installed Kimmeridge Wareham Dorset. Goods only lift with 1000kg capacity with a clear working platform size 860mm x 1927mm. Lift height 3150mm with telescopic roof, the roof is designed to fit flush with the upper floor aperture.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

111 – Goods Lift Rochdale Greater Manchester

 

Goods Lift Rochdale Greater Manchester

Goods Lift 500kg installed Rochdale Greater Manchester Lancashire in a self-supporting cladding structure comprised of infilled sheet steel cladded panels painted White RAL 9010.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

112 – Goods Lift Eastbourne East Sussex

Goods Lift Eastbourne East Sussex

Goods Lift Eastbourne East Sussex

Goods Lift 500kg through floor installed Eastbourne, East Sussex in a self-supporting cladded panel structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. With a platform size 1500mm x 1500mm and 1350mm door openings at both levels finished in Traffic Red RAL 3020. Lift height 3100mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

113 – Split Level Goods Lift

Split Level Goods Lift

Split Level Goods Lift

Split Level Scissor Table Goods Lift 1000kg installed Queen Mary University of London with a platform size 1500mm long x 1200mm wide with tear plate. Goods Lift is installed in a 360mm recessed pit (by others) with a lift stoke 1600mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

114 – Bespoke External Goods Lift

Split Level Goods Lift

Bespoke External Goods Lift

Bespoke External Goods Lift with maximum working load 250kg installed Queen Mary University of London, enclosed in a self-supporting mesh shaft. The platform will be 1200mm x 1100mm and guarded 900mm high on the non-loading edges

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

115 – BOXlift Pro Goods Lift with Trained Attendant

 BOXlift Pro Goods Lift with Trained Attendant

BOXlift Pro Goods Lift with Trained Attendant

BOXlift Pro Goods lift with trained attendant freestanding designed to allow for two trained competent attendants to accompany the freight / goods safely and easily in buildings with high movement of goods between floors, ie shopping centres, department stores, warehouses, supermarkets and industrial installations.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

116 – Loading Bay Lifts

 Loading Bay Lifts

Loading Bay Lifts

Loading Bay Lift 5000kg partially concentrated load to accommodate a fork lift truck delivered and installed Colwick Nottingham. Loading bay lift installed in an existing pit with fixed loading ramp at one short end. Platform size depth 3000mm x width 2000mm with a travel dock height 1200mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

117 – Between Levels Goods Lift

 Between Levels Goods Lift

Between Levels Goods Lift

Between Levels Goods Lift (Short Rise) with a capacity 1500kg uniformly distributed load (UDL). Travel height 1100mm closed height 230mm total raised height: 1330mm limited to 1300mm via an adjustable limit switch.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

118 – Low Profile Single Scissor Lift Tables

 Low Profile Single Scissor Lift Tables

Low Profile Single Scissor Lift Tables

4 x Low Profile Single Scissor Lift Tables with auto level and stand. Lift capacity 1500kg with a platform size 1500mm x 1000mm closed height 85mm with a travel 715mm being total raised height 800mm. Ramp located at one short end to allow pallet truck to place and remove CHEP pallets.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

119 – Cladded 1000kg Mezzanine Floor Goods Lift

 Cladded 1000kg Mezzanine Floor Goods Lift

Cladded 1000kg Mezzanine Floor Goods Lift

Cladded 1000kg Mezzanine Floor Goods Lift installed Billingham Stockton-on-Tees Cleveland in a self-supporting cladded panel structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. With a platform size 1500mm x 1500mm and 1350mm door openings at both levels finished in Traffic Red RAL 3020. Lift height 3480mm.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

120 – Mezzanine Floor Goods Lift Hertfordshire

 Mezzanine Floor Goods Lift Hertfordshire

Mezzanine Floor Goods Lift Hertfordshire

Mezzanine Floor Goods Lift installed Elstree Borehamwood Hertfordshire with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Platform size 1300mm x 1100mm and guarded 900mm high on the non-loading edges.

More Details 

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

121 – Mezzanine Goods Lifts

 

Mezzanine Goods Lifts

Mezzanine Goods Lift 500kg, enclosed in a self-supporting mesh shaft with a bespoke oversized platform size 800mm x 3100mm and guarded 900mm high on the non-loading edges.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

122 – Between Floor Split Level Goods Lift

 Between Floor Split Level Goods Lift

Between Floor Split Level Goods Lift

Custom between floor split level mezzanine floor goods Lift 500kg installed in food processing factory (clean room area) with a self-supporting punched cladded structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

123 – Hand Loaded Mezzanine Goods Lift

 Hand loaded mezzanine goods lift

Hand Loaded Mezzanine Goods Lift

Hand loaded mezzanine goods lift with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 800mm x 1000mm and guarded 200mm high on the non-loading edges, the platform will dock 950mm above the finished upper floor level.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

124 – Mezzanine Goods Lift with Trained Attendant

 Mezzanine Goods Lift with Trained Attendant

Mezzanine Goods Lift with Trained Attendant

Mezzanine goods lift – goods only or with trained attendant installed St Austell Cornwall. With a lift capacity 800kg and a platform size 1400mm (1350mm door) x 1650mm the goods lift will accommodate goods and trained operator.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

125 – Mezzanine Goods Lift Hertfordshire

Mezzanine Goods Lift Hertfordshire

Mezzanine Goods Lift Hertfordshire

Mezzanine goods lift installed Hertfordshire will be used primarily to transport 400L vessel filled with wash coat liquid / slurry on a standard Euro pallet from the ground floor to the mezzanine floor. The lift cabin car shall therefore be totally enclosed to avoid any spillages.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

126 – Mezzanine Goods Lift Roller Shutter Door

 Mezzanine Goods Lift Roller Shutter Door

Mezzanine Goods Lift Roller Shutter Door

Mezzanine Goods Lift installed Saffron Walden Essex 500kg capacity with a platform size 2300mm x 1300mm guarded 1100mm high on back (Mast) and one short side. Goods lift will pass through a pre prepared aperture and installed in a 110mm pit by others. Goods lift supplied with the following; platform material anti-skid checker plate, operation electro-hydraulic, electrics 3 phase, 415v, 50Hz, 3Kw, controls low voltage ‘press to go’ push buttons fitted with key lock and emergency stop at each level.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

127 – Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift 500kg installed Corby Northamptonshire enclosed in a self-supporting mesh shaft with a platform size 1300mm x 1300mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

128 – Small Split Level Goods Lift

Small Split Level Goods Lift

Small Split Level Goods Lift

Bespoke split level between floor goods lift 500kg capacity to accommodate trollies / roll cages installed in a shallow pit Pimlico London SW1. Platform size 1067mm (door width 900mm) x 1065mm lift stroke 1180mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

129 – 1000kg Goods Lift Installed in a Restaurant

1000kg Goods Lift Installed in a Restaurant

1000kg Goods Lift installed in a restaurant, deli and indoor market in the heart of Bishops Stortford, Hertfordshire. The free standing cladded goods lift is enclosed in a fabricated shaft (by others) with a lift height 2940mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

130 – Mezzanine Goods Lift 1000kg 5 stop installed Crewe Cheshire

Mezzanine Goods Lift Cheshire

Mezzanine Goods Lift 1000kg 5 stop installed Crewe Cheshire

Mezzanine Goods Lift 1000kg 5 stop installed Crewe Cheshire in a self-supporting cladding structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. With a platform size 1500mm x 2500mm and 1400mm door openings at all 5 levels finished in Traffic Red RAL 3020. The platform is fitted with an enclosed cabin.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

131 – Compact Basement Goods Lifts

Compact Basement Goods Lifts

Compact Basement Goods Lifts

Compact Basement Goods Lift installed in a Pizza Restaurant in the centre of Coventry Warwickshire with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Platform size 900mm x 850mm guarded 900mm high on the non-loading edges finished height 2500mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

132 – Goods Lift 500kg York

Goods Lift with 500kg York

Goods Lift 500kg York

Goods Lift with 500kg SWL installed Unit 2, York Business Park York with a travel height 3400mm. Goods lift passes through a formed aperture (by others) and comprises of self-supporting cladded structure with infilled sheet steel clad panels Dark Grey RAL 7024.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

133 – Goods Lift Chesterfield

Goods Lift Chesterfield Interlocking Gates

Goods Lift Chesterfield

Goods Lift triple scissor table design installed Chesterfield with 500kg partially distributed load pit installed with a finished floor level height 5500mm. Platform length 3100mm x 1800mm wide with a closed height 1100mm safety perimeter not included fitted with durbar chequer plate finish.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

134 – Vertical Platform Lifts Norfolk – Cambridge

Vertical Platform Lifts Norfolk - Cambridge

Vertical Platform Lifts Norfolk – Cambridge

DDA open vertical platform lift installed Alive Lynnsport and Leisure Park in Kings Lynn Norfolk with a 350kg lift capacity. Platform size increased 900mm wide x 1400mm long which will include for a wheelchair plus carer, finished floor level 520mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

135 – Mezzanine Goods Lifts Peterborough

Mezzanine Goods Lifts Peterborough

Mezzanine Goods Lifts Peterborough

3 Stop Twin Mezzanine Goods Lifts each lift 500kg capacity installed Peterborough Cambridgeshire. Goods lifts are installed in pre formed pits at 130mm by others, finished floor levels ground, 3979mm and 7983mm with lifts finished in clad steel panels Dark Grey RAL 7024.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

136 – Goods Lift Watford Hertfordshire

Goods Lift Watford Hertfordshire

Goods Lift Watford Hertfordshire

Hydraulic single acting Goods Lift installation Watford Hertfordshire with a lift capacity 500kg and a clear platform size 1500mm (1450mm door) x 1500mm, finished floor level 3100mm. The platform is fitted with 2 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

137 – Goods Lift Derbyshire

Goods Lift Derbyshire

Goods Lift Derbyshire

Goods Lift 200kg installed Foston Derbyshire in a self-supporting cladded panelled structure comprised of infilled Zinc panels. Platform enclosed with cabin size 1200mm x 1400mm with 1200mm door width openings at both levels finished in Traffic Red RAL 3020, lift height 4910mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

138 – Goods Lift London

Goods Lift London

Goods Lift London

Hydraulic Goods Lift single mast installed Hackney South Shoreditch London with a lift capacity 250kg and a clear platform size 1200mm (1200mm door) x 800mm, finished floor level 2500mm. The platform is fitted with 3 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

139 – Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift Corby Northamptonshire

Mezzanine Goods Lift 1000kg same face entry installed Corby Northamptonshire with a finished floor height 4057mm enclosed in a self-supporting fully cladded panel shaft RAL 7034. The platform size 1500mm x 1500mm with 1100mm high infilled guarding on the 3 non-loading sides finished RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

140 – Mezzanine Goods Lifts Southall Middlesex

Mezzanine Goods Lifts Southall Middlesex

Mezzanine Goods Lifts Southall Middlesex

Mezzanine Goods Lift 500kg through car entry installed Southall Middlesex with a finished floor height 3160mm enclosed in a self-support mesh shaft RAL 7024 Grey. The platform size 1500mm x 1500mm with 1100mm high infilled guarding on the non-loading sides finished RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

141 – Mezzanine Goods Lifts Manchester

Mezzanine Goods Lifts Manchester

Mezzanine Goods Lifts Manchester

Mezzanine Goods Lift 1,000kg Twin Mast Hydraulic installed Manchester M11 2NB with a finished floor level 2904mm, goods lift raised 646mm off the ground to allow for customers raised decking.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

142 – Heavy Duty Goods Lift London

Heavy Duty Goods Lift London

Heavy Duty Goods Lift London

Heavy duty dual mast hydraulic goods lift installed Wimbledon London with a lift capacity 1500kg and a clear platform size 2500mm (2500mm door) x 1500mm, finished floor level 3700mm. Lift platform is fitted with 2 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020 and twin drop down barriers on the loading sides.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

143 – Mezzanine Goods Lift Haverhill Suffolk

Mezzanine Goods Lift Haverhill Suffolk

Mezzanine Goods Lift Haverhill Suffolk

Twin mezzanine goods lifts with each lift having a SWL 1250kg installation Haverhill Suffolk. Platform to have a 3 side enclosed stainless steel cabin with roof size 1500mm x 1830mm x 2100mm in addition stainless steel checker plate panels are fitted on 3 sides at 1500mm and the floor in 304 stainless.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

144 – 1000kg Goods Lift Park Royal London

1000kg Goods Lift Park Royal London

1000kg Goods Lift Park Royal London

Large Goods Lift installed Park Royal London NW10 6NF with a lift capacity 1,000kg and a clear platform size 2800mm (2800mm door) x 1500mm, finished floor level 3500mm. Goods Lift platform is fitted with 2 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020 with an open platform.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

145 – Goods Lift Sheffield

Goods Lift Sheffield

Goods Lift Sheffield

Goods Lift installed Sheffield with same side loading / unloading using a single mast lift capacity 1000kg with a clear platform size 1500mm x 1500mm, finished floor level FFL 2904mm. Lift platform fitted with 3 x 1100mm high infilled sheet panels on the non-loading sides in Red RAL 3020 and a drop down barrier on the loading sides. In addition the platform is fitted with shoots bolts / parking bolts, these engage from the platform and locate on the main ring beam of the support structure making it safe for personnel to enter the platform.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

146 – Goods Lift in London

Goods Lift in London

Goods Lift in London

Opposed mast through car Goods Lift installed London lift capacity 1500kg with a clear platform size 1600mm x 1600mm, finished floor level FFL 3640mm. Lift platform fitted with 2 x 1100mm high infilled sheet panels on the non-loading sides in Red RAL 3020 and twin drop down barriers on the loading sides. In addition the platform is fitted with shoots bolts / parking bolts, these engage from the platform and locate on the main ring beam of the support structure making it safe for personnel to enter the platform.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

147 – Goods Lift Enfield

Goods Lift Enfield

Goods Lift Enfield

Goods Lift installed London Borough of Enfield with through car loading at lower and upper level 3 entrances, exits in total. Goods Lift manufactured using a single mast with a lift capacity 1000kg and a clear platform size 1500mm x 1500mm, finished floor level FFL 4100mm. Lift platform fitted with 2 x 1100mm high infilled sheet panels on the non-loading sides in White RAL 9010 In addition the platform is fitted with shoots bolts / parking bolts, these engage from the platform and locate on the main ring beam of the support structure making it safe for personnel to enter the platform.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

148 – Goods Lift East Sussex

Goods Lift East Sussex

Goods Lift East Sussex

Goods Lift single mast installed St Leonards-on-sea Hastings East Sussex with a lift capacity 500kg and a clear platform size 1500mm x 1500mm, finished floor level 3548mm. Goods Lift platform is fitted with 3 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020 and a drop down barrier on the loading sides.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

149 – Mezzanine Goods Lift Letchworth Hertfordshire

Mezzanine Goods Lift Letchworth Lertfordshire

Mezzanine Goods Lift Letchworth Hertfordshire

The lift platform will be 1500mm x 2500mm finished Traffic Red RAL 3020, platform is also fitted with an enclosed cabin 2000mm high with the loading unloading entries fitted with single outward opening swing gates. The lift is supplied with twin interlocked entry doors at each level and these are fitted with perspex viewing panels door openings are clear 1500mm.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

150 – Goods Lift Park Royal London UK

Goods Lift Park Royal London NW10

Goods Lift Park Royal London UK

Goods Lift single mast installed Park Royal London NW10 with a lift capacity 500kg and a clear platform size 1500mm x 1500mm, finished floor level 4100mm. Goods Lift platform is fitted with 2 x 1100mm high infilled panels on the non-loading sides and drop down barrier on the loading sides in Yellow RAL 1028.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

151 – Goods Lifts Bedford

Goods Lifts Bedford

Goods Lifts Bedford

500kg 2 stop Goods Lift with a finished floor level 3480mm with single face entry exit installed in a 150mm pit enclosed all in a self-supporting cladded panel structure comprised of infilled sheet steel clad panels painted White RAL 9010.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

152 – Mezzanine Goods Lift Bedford

Mezzanine Goods Lift Bedford

Mezzanine Goods Lift single mast installed Kempston Bedford with a lift capacity 350kg and a clear platform size 1200mm x 1500mm, finished floor level 4050mm. Goods Lift platform fitted with fully enclosed car 1100mm high with infilled panels on the non-loading sides and twin opening gates on the other two sides finished in Red RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

153 – Scissor Tables

Scissor Tables

Scissor Tables

Split Level Goods Lift 1000kg single scissor table with uniformly distributed load (UDL) freestanding supplied with ramp 1000mm wide x 2000mm long. Platform size 1000mm wide x 1300mm long with a travel height 780mm set with an adjustable limit switch.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

154 – Goods Lift Dartford Kent

Goods Lift Dartford Kent

Goods Lift Dartford Kent

Goods Lift single mast installed Clipper Blvd East, Crossways Business Park, Dartford Kent with a lift capacity 1000kg and a clear platform size 1500mm x 1500mm, finished floor level 4851mm. Goods Lift platform fitted with fully enclosed car 1100mm high with infilled panels on the non-loading sides and twin opening interlocked gates on the loading face finished in Red RAL 3020. At the lower level Goods lift supplied with run on loading ramp 120mm x 1580mm x 1250mm

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk

155 – Goods Lift Burton-on-Trent Staffordshire

Goods Lift Burton-on-Trent Staffordshire

Goods Lift single mast 4 stop with a lift capacity 1200kg and a clear platform size 1500mm x 1500mm, finished floor level 9784mm installed Burton-on-Trent Staffordshire. Goods Lift platform fitted with fully enclosed car with 2000mm high infilled panels on the non-loading sides and single drop down barrier on the loading side finished in Red RAL 3020.

More Details  

Contact us on Tel 01553 811977 or email us

at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk